NCERT Solutions-Motion in a Straight Line Class 11 Physics

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

The topics learnt using the NCERT Solutions for Class 11 Physics Chapter Motion in a Straight, which are updated according to the CBSE Syllabus. 

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line

Q1. In which of the following examples of motion can the body be considered
approximately a point object?
(a) A railway carriage moving without jerks between two stations.
(b) A cap on top of a man cycling smoothly on a circular track.
(c) A spinning cricket ball that turns sharply on hitting the ground.
(d) A tumbling beaker that has slipped off the edge of a table.

Ans.

(a), (b) The size of the railway carriage and the cap is very small as compared to the distance they’ve travelled, i.e. the distance between the two stations and the length of the race track, respectively. Therefore, the cap and the carriage can be considered as point objects.

The size of the cricket ball is comparable to the distance through which it bounces off after hitting the floor. Thus, the cricket ball cannot be treated as a point object. Likewise, the size of the beaker is comparable to the height of the table from which it drops.  Thus, the beaker cannot be treated as a point object.

Q2. The position-time (x-t) graphs for two children, A and B, returning from their school O to their homes, P and Q, respectively, are shown in Fig. Choose the correct entries in the brackets below:
(a) (A/B) lives closer to the school than (B/A)
(b) (A/B) starts from the school earlier than (B/A)
(c) (A/B) walks faster than (B/A)
(d) A and B reach home at the (same/different) time
(e) (A/B) overtakes (B/A) on the road (once/twice).

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

(a) A lives closer to the school than B, because A has to cover shorter distances [OP < OQ].
(b) A starts from school earlier than B, because for x= 0, t = 0 for A but for B, t has some finite time.
(c) The slope of B is greater than that of A; therefore, B walks faster than A.
(d) Both A and B will reach their home at the same time.
(e) At the point of intersection, B overtakes A on the roads once.

Q3. A woman starts from her home at 9.00 am, walks at a speed of 5 km/h on a straight road up to her office 2.5 km away, stays at the office up to 5.00 pm, and returns home by auto at a speed of 25 km/h. Choose suitable scales and plot the x-t graph of her motion.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

Distance to her office = 2.5 km.
Walking speed the woman = 5 km/h
Time taken to reach office while walking = (2.5/5 ) h=(1/2) h = 30 minutes

Speed of auto = 25 km/h

Time taken to reach home in auto = 2.5/25 = (1/10) h = 0.1 h = 6 minutes

In the graph, O is taken as the origin of the distance and the time, then at  t = 9.00 am, x = 0
and at t = 9.30 am, x = 2.5 km

OA is the portion on the x-t graph that represents her walk from home to the office. AB represents her time of stay in the office from 9.30 to 5. Her return journey is represented by BC.

Q4. A drunkard walking in a narrow lane takes 5 steps forward and 3 steps backwards, followed again by 5 steps forward and 3 steps backwards, and so on. Each step is 1 m long and requires 1 s. Plot the x-t graph of his motion. Determine graphically and otherwise how long the drunkard takes to fall in a pit 13 m away from the start.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

The time taken to go one step is 1 second. In 5 s, he moves forward through a distance of 5 m, and then in the next 3s, he comes back by 3 m. Therefore,  in 8 s, he covers 2 m. So, to cover a distance of 8 m, he takes 32 s. He must take another 5 steps forward to fall into the pit. So, the total time taken is 32 s + 5 s = 37 s to fall into a pit 13 m away.

Q5. A jet aeroplane travelling at the speed of 500 km/h ejects its products of combustion at the speed of 1500 km/h relative to the jet plane. What is the speed of the latter with respect to an observer on the ground?

Ans.

Speed of the jet aeroplane, VA= 500 km/h

The speed at which the combustion products are ejected relative to the jet plane, VB – VA

= – 1500 km/h

(The negative sign indicates that the combustion products move in a direction opposite to that of the jet)

Speed of combustion products w.r.t. observer on the ground, VB – 500 = – 1500

VB = – 1500 + 500 = – 1000 km/h

Q6. A car moving along a straight highway with a speed of 126 km h–1 is brought to a stop within a distance of 200 m. What is the retardation of the car (assumed uniform), and how long does it take for the car to stop?

Ans.

The initial velocity of the car = u

The final velocity of the car = v

Distance covered by the car before coming to rest = 200 m

Using the equation,

v = u + at

t = (v – u)/a = 11.44 sec.

Therefore, it takes 11.44 sec for the car to stop.

Q7. Two trains, A and B, of length 400 m each, are moving on two parallel tracks with a
uniform speed of 72 km h–1 in the same direction, with A ahead of B. The driver of
B decides to overtake A and accelerates by 1 m s–2. If, after 50 s, the guard of B just
brushes past the driver of A, what was the original distance between them?

Ans.

Length of trains A and B = 400 m

Speed of both the trains = 72 km/h = 72 x (5/18) = 20m/s

Using the relation, s = ut + (1/2)at2

Distance covered by the train B

SB = uBt + (1/2)at2

Acceleration, a = 1 m/s

Time = 50 s

SB = (20 x 50) + (1/2) x 1 x (50)2

= 2250 m

Distance covered by the train A

SA = uAt + (1/2)at2

Acceleration, a = 0

SA = uAt  = 20 x 50 = 1000 m

Therefore, the original distance between the two trains = SB – SA = 2250 – 1000 = 1250 m

Q8. On a two-lane road, car A is travelling at a speed of 36 km/h. Two cars, B and
C, approach car A in opposite directions with a speed of 54 km/h each. At a
certain instant, when the distance AB is equal to AC, both being 1 km, B decides
to overtake A before C does. What is the minimum acceleration of car B required to
avoid an accident?

Ans:

The speed of car A = 36 km/h = 36 x (5/8) = 10 m/s

Speed of car B = 54 km/h = 54 x (5/18) = 15 m/s

Speed of car C = – 54 km/h = -54 x (5/18) = -15 m/s (negative sign shows B and C are in opposite directions)

Relative speed of A w.r.t. C, VAC = VA – VB = 10 – (-15) = 25 m/s

Relative speed of B w.r.t. A, VBA = VB – VA = 15 – 10 = 5 m/s

Distance between AB = Distance between AC = 1 km = 1000 m

Time taken by the car C to cover the distance AC, t = 1000/VAC = 1000/ 25 = 40 s

If a is the acceleration, then

s = ut + (1/2) at2

1000 = (5 x 40) + (1/2) a (40) 2

a = (1000 – 200)/ 800 = 1 m/s2

Thus, the minimum acceleration of car B required to avoid an accident is 1 m/s2

Q9. Two towns, A and B, are connected by regular bus service, with a bus leaving in either direction every T minutes. A man cycling with a speed of 20 km h–1 in the direction A to B notices that a bus goes past him every 18 min in the direction of his motion and every 6 min in the opposite direction. What is the period T of the bus service, and with what speed (assumed constant) do the buses ply on the road?

Ans.

Speed of each bus = Vb

Speed of the cyclist = V= 20 km/h

The relative velocity of the buses plying in the direction of motion of the cyclist is Vb – Vc.
The buses playing in the direction of motion of the cyclist go past him after every 18 minutes, i.e. (18/60) s.

Distance covered = (Vb – Vc ) x 18/60

Since the buses are leaving every T minutes. Therefore, the distance is equal to Vb x (T/60)

(Vb – Vc ) x 18/60 = Vb x (T/60) ——(1)

The relative velocity of the buses plying in the direction opposite to the motion of the cyclist is Vb + Vc
The buses go past the cyclist every 6 minutes, i.e. (6/60) s.

Distance covered = (Vb + Vc ) x 6/60

Therefore, (Vb +Vc ) x 6/60 = Vb x (T/60)——(2)

Dividing (2) by (1)

[(Vb – Vc ) x 18/60]/ [(Vb + Vc ) x 6/60 ]= [Vb x (T/60)] /[Vb x (T/60)]

(Vb – Vc ) 18/(Vb +Vc ) 6 = 1

(Vb – Vc )3 = (Vb +Vc )

Substituting  the value of Vc

(Vb – 20 )3= (Vb + 20 )

3Vb – 60 = Vb + 20

2Vb = 80

Vb = 80/2 = 40 km/h

To find the value of T, substitute the values of Vb and Vc in equation (1)

(Vb – Vc ) x 18/60 = Vb x (T/60)

(40 – 20) x (18/60) = 40 x (T/60)

T = (20 x 18) /40 = 9 minutes

Q10. A player throws a ball upwards with an initial speed of 29.4 m/s.
(a) What is the direction of acceleration during the upward motion of the ball?
(b) What are the velocity and acceleration of the ball at the highest point of its motion?
(c) Choose the x = 0 m and t = 0 s to be the location and time of the ball at its highest point, vertically downward direction to be the positive direction of the x-axis, and give the signs of position, velocity and acceleration of the ball during its upward and downward motion.
(d) To what height does the ball rise, and after how long does the ball return to the player’s hands? (Take g = 9.8 m s–2 and neglect air resistance).

Ans.

(a) The acceleration due to gravity always acts downwards towards the centre of the Earth.
(b) At the highest point of its motion, the velocity of the ball will be zero, but the acceleration due to gravity will be 9.8 m s–2 acting vertically downward.
(c) If we consider the highest point of ball motion as x = 0, t = 0, and vertically downward direction to be +ve direction of the x-axis, then
(i) During the upward motion of the ball before reaching the highest point position, x = +ve, velocity, v = -ve and acceleration, a = +ve.
(ii) During the downward motion of the ball after reaching the highest point position, velocity and acceleration, all three quantities are positive.
(d) Initial speed of the ball, u= -29.4 m/s

The final velocity of the ball, v = 0

Acceleration = 9.8 m/s2

Applying in the equation v2 – u2 = 2gs

0 – (-29.4)2 = 2 (9.8) s

s = – 864.36/19.6 = – 44.1

Height to which the ball rises = – 44.1 m (negative sign represents upward direction)

Considering the equation of motion

v = u + at

0 = (-29.4) + 9.8t

t = 29.4/9.8 = 3 seconds

Therefore, the total time taken for the ball to return to the player’s hands is 3 +3 = 6 s.

Q11. Read each statement below carefully and state with reasons and examples, if it is true or false; A particle in one-dimensional motion
(a) with zero speed at an instant may have non-zero acceleration at that instant
(b) with zero speed may have non-zero velocity
(c) with constant speed must have zero acceleration
(d) with positive value of acceleration must be speeding up

Ans.

(a) True

(b) False

(c) True (if the particle rebounds instantly with the same speed, it implies infinite acceleration, which is unphysical)

(d) False (true only when the chosen positive direction is along the direction of motion)

Q12. A ball is dropped from a height of 90 m on a floor. At each collision with the floor, the ball loses one-tenth of its speed. Plot the speed-time graph of its motion between t = 0 to 12 s.

Ans.

Height from which the ball is dropped = 90 m

The initial velocity of the ball, u = 0

Let v be the final velocity of the ball

Using the equation

v2 – u2 = 2as ——–(1)

v12 – 0 = 2 x 10 x 90

v1= 42.43 m/s

Time taken for the first collision can be given by the equation

v = u + at

42.43 = 0 + (10) t

t1 = 4.24 s

The ball losses one-tenth of the velocity at collision. So, the rebound velocity of the ball is

v2= v – (1/10)v

v2 = (9/10) v

v2= (9/10) (42.43)

= 38.19 m/s

Time taken to reach maximum height after the first collision is

v = u + at

38.19 = 0 + (10)t2

t2 = 3.819 s

The total time taken by the ball to reach the maximum height is

T = t1 + t2

T = 4.24 + 3.819  = 8.05 s

Now the ball will travel back to the ground in the same time as it took to reach the maximum height = 3.819 s

Total time taken will be, T = 4.24 + 3.819 + 3.819 = 11.86

Velocity after the second collision

v3 = (9/10) (38.19)

v3 = 34.37 m/s

Using the above information, the speed time graph can be plotted

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Q13. Provide clear explanations and examples to distinguish between:

(a) The total length of a path covered by a particle and the magnitude of displacement over the same interval of time.

(b) The magnitude of average velocity over an interval of time, and the average speed over the same interval. [Average speed of a particle over an interval of time is defined as the total path length divided by the time interval].

In (a) and (b), compare and find which of the two quantities is greater.

When can the given quantities be equal? [For simplicity, consider one-dimensional motion only].      

Ans.

( a ) Let us consider an example of a football; it is passed to player B by player A and then instantly kicked back to player A along the same path. Now, the magnitude of displacement of the ball is 0 because it has returned to its initial position. However, the total length of the path covered by the ball = AB +BA = 2AB. Hence, it is clear that the first quantity is greater than the second.

( b ) Taking the above example, let us assume that football takes t seconds to cover the total distance. Then,

The magnitude of the average velocity of the ball over time interval t = Magnitude of displacement/time interval

= 0 / t = 0.

The average speed of the ball over the same interval = total length of the path/time interval

= 2AB/t

Thus, the second quantity is greater than the first.

The above quantities are equal if the ball moves only in one direction from one player to another (considering one-dimensional motion).

Q14. A man walks on a straight road from his home to a market 2.5 km away at a
speed of 5 km/h. Finding the market closed, he instantly turns and walks back
home with a speed of 7.5 km h–1. What is the
(a) Magnitude of average velocity, and
(b) Average speed of the man over the interval of time (i) 0 to 30 min, (ii) 0 to
50 min, (iii) 0 to 40 min? [Note: You will appreciate from this exercise why it
is better to define average speed as total path length divided by time and not
as the magnitude of average velocity. You would not like to tell the tired man on
his return home that his average speed was zero !]

Ans.

Distance to the market = 2.5 km = 2500 m

Speed of the man  walking to the market= 5 km/h = 5 x (5/18) = 1.388 m/s

Speed of the man walking when he returns back home = 7.5 km/h = 7.5  x (5/18) = 2.08 m/s

(a) Magnitude of the average speed is zero since the displacement is zero

(b)

(i) Time taken to reach the market = Distance/Speed = 2500/1.388 = 1800 seconds = 30 minutes

So, the average speed over 0 to 30 minutes is 5 km/h or  1.388 m/s

(ii) Time taken to reach back home = Distance/Speed = 2500/2.08 = 1200 seconds = 20 minutes

So, the average speed is

Average speed over a interval of 50 minutes= distance covered/time taken = (2500 + 2500)/3000 = 5000/3000 = 5/3 = 1.66 m/s

= 6 km/h

(ii) Average speed over an interval of 0-40 minutes = distance covered/ time taken = (2500+ 1250)/2400 = 1.5625 seconds = 5.6 km/h

Q15. In Exercises 3.13 and 3.14, we have carefully distinguished between average speed and the magnitude of average velocity. No such distinction is necessary when we consider the instantaneous speed and the magnitude of velocity. The instantaneous speed is always equal to the magnitude of instantaneous velocity. Why?

Ans.

Instantaneous velocity and instantaneous speed are equal for a small interval of time because the magnitude of the displacement is effectively equal to the distance travelled by the particle.

Q16. Look at the graphs (a) to (d) carefully and state, with reasons, which of these cannot possibly represent the one-dimensional motion of a particle? 

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

None of the four graphs shows a one-dimensional motion. 

(a) Shows two positions at the same time, which is not possible. 

(b) A particle cannot have velocity in two directions at the same time.

(c) Graph shows negative speed, which is impossible. Speed is always positive.

(d) Path length decreases in the graph; this is also not possible.

Q17. The figure shows the x-t plot of the one-dimensional motion of a particle. Is it correct to say from the graph that shows that the particle moves in a straight line for t < 0 and on a parabolic path for t >0? If not, suggest a suitable physical context for this graph.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

It is not correct to say that the particle moves in a straight line for t < 0 (i.e., -ve) and on a parabolic path for t > 0 (i.e., + ve) because the x-t graph does not represent the path of the particle.

A suitable physical context for the graph can be the particle is dropped from the top of a tower at t =0.

Q18. A police van moving on a highway with a speed of 30 km h–1 fires a bullet at a thief’s car speeding away in the same direction with a speed of 192 km h–1. If the muzzle speed of the bullet is 150 m s–1, with what speed does the bullet hit the thief’s car? (Note: Obtain that speed which is relevant for damaging the thief’s car).

Ans.

Speed of the police van = 30 km/h = 30 x (5/18) = 25/3 m/s

Speed of a thief’s car = 192 km/h = 192 x (5/18) = 160/3 m/s

Muzzle Speed of  the bullet = 150 m/s

Speed of the bullet = speed of the police van + muzzle speed of  the bullet

= (25/3)+ 150 = 475/3 m/s

The relative velocity of the bullet w.r.t. the thief’s car is

v = Speed of the bullet – Speed of a thief’s car

= (475/3) – (160/3) = 105 m/s

The bullet hits the thief’s car at a speed of 105 m/s

Q19. Suggest a suitable physical situation for each of the following graphs.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

(a)The graph is similar to kicking a ball, and then it hits the wall and rebounds with a reduced speed. The ball then moves in the opposite direction and hits the opposite wall, which stops the ball.
(b) The graph shows a continuous change in the velocity of the object, and at some instant, it losses some velocity. Therefore, it may represent a situation where a ball falls on the ground from a certain height and rebounds with a reduced speed.
(c) A cricket ball moving with a uniform speed is hit by a bat for a very short time interval.

Q20. The following figure gives the x-t plot of a particle executing one-dimensional simple harmonic motion. Give the signs of position, velocity and acceleration variables of the particle at t = 0.3 s, 1.2 s, – 1.2 s.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

In S.H.M., acceleration, a = – ω2 x , ω is the angular frequency —-(1)
(i) At t = 0.3 s, x < 0, i.e. position is negative. Moreover, as x becomes more negative with time, it shows that velocity is negative (i.e., v < 0). However, using equation (1), acceleration will be positive.
(ii) At t = 1.2 s,  Positions and velocity will be positive. Acceleration will be negative.
(iii) At t = -1.2 s, Position, x is negative.  Velocity and acceleration will be positive.

Q21. The figure gives the x-t plot of a particle in one-dimensional motion. Three different equal intervals of time are shown. In which interval is the average speed greatest, and in which is it the least? Give the sign of average velocity for each interval.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

Interval 3 is the greatest, and 2 is the least. The average velocity is positive for intervals 1 and 2, and it is negative for interval 3.

Q22. The following figure gives a speed-time graph of a particle in motion along a constant direction. Three equal intervals of time are shown. In which interval is the average acceleration greatest in magnitude? In which interval is the average speed greatest? Choosing the positive direction as the constant direction of motion gives the signs of v and a in the three intervals. What are the accelerations at points A, B, C and D?

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

The change in the speed with time is maximum in interval 2. Therefore, the average acceleration is greatest in magnitude in interval 2.

The average speed is maximum in interval 3.

The sign of velocity is positive in intervals 1, 2 and 3. The acceleration depends on the slope. The acceleration is positive in intervals 1 and interval 3, as the slope is positive. The acceleration is negative in interval 2, as the slope is negative.

Acceleration at A, B, C and D is zero since the slope is parallel to the time axis at these instants.

Q23. A three-wheeler starts from rest, accelerates uniformly with 1 m s–2 on a straight road for 10 s, and then moves with uniform velocity. Plot the distance covered by the vehicle during the nth second (n = 1,2,3….) versus n. What do you expect this plot to be during accelerated motion: a straight line or a parabola?

Ans.

For a straight line, the distance covered by a body in nth second is:
SN = u + a (2n – 1)/2     . . . . . . . . ( 1 )
Where,

a = Acceleration

u = Initial velocity
n = Time = 1, 2, 3, . . . . . , n
In the above  case,
a = 1 m/s2 and u = 0.
∴ SN = (2n – 1) / 2     . . . . . . . . . . .( 2 )
This relation shows that:
SN ∝ n                    . . . . .. . . . . ( 3 )

Now substituting different values of n in equation ( 2 ) we get:

n123456789
SN0.51.52.53.54.55.56.57.58.5

This plot is expected to be a straight line.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Q24. A boy, standing on a stationary lift (open from above), throws a ball upwards with the maximum initial speed he can, equal to 49 m s-1. How much time does the ball take to return to his hands? If the lift starts moving up with a uniform speed of 5 m s-1 and the boy again throws the ball up with the maximum speed he can, how long does the ball take to return to his hands?

Ans. 

The initial velocity of the ball, u = 49 m/s

Case: I

The boy throws the ball upwards when the lift is stationary. The vertically upward direction is taken as the positive direction. The displacement of the ball is zero.

Considering the equation of motion

s=ut + (1/2)at2

0 = (49)t + (1/2) (-9.8)t2

t = (49 x 2)/9.8 = 98/9.8 = 10 sec

Case: II

As the lift starts moving with a speed of 5 m/s, the initial speed of the ball will be 49 m/s + 5 m/s = 54 m/s

The displacement of the ball will be s =  5t’

Therefore, the time taken can be calculated using the formula

s = ut + (1/2) at2

5t’ = (54) t’ + (1/2)(-9.8) t’2

t’ = 2(54 – 5)/9.8 = 10 sec

The time taken will remain the same in both cases.

Q25. On a long, horizontally moving belt figure, a child runs to and fro with a speed 9 km h–1 (with respect to the belt) between his father and mother located 50 m apart on the moving belt. The belt moves at a speed of 4 km h–1. For an observer on a stationary platform outside, what is the
(a) speed of the child running in the direction of motion of the belt?
(b) speed of the child running opposite to the direction of motion of the belt?
(c) time taken by the child in (a) and (b)?
Which of the answers alter if motion is viewed by one of the parents?

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

Speed of child = 9 km h-1

Speed of belt = 4 km h-1
(a) When the boy runs in the direction of motion of the belt, then his speed as observed by the stationary observer = (9 + 4) km h-1 = 13 km h-1.

(b) When the boy runs opposite to the direction of motion of the belt, then speed of the child as observed by the stationary observer = (9 – 4) km h-1 = 5 km h-1

(c) Distance between the two parents = 50 m = 0.05 km

The speed of the boy, as observed by both the parents, is 9 km h-1

Time taken by the boy to move towards one of the parents =0.05 km/9k h-1=0.0056 h =20 S

Q26. Two stones are thrown up simultaneously from the edge of a cliff 200 m high with initial speeds of 15 m s–1 and 30 m s–1. Verify that the graph shown in Fig. 3.27 correctly represents the time variation of the relative position of the second stone with respect to the first. Neglect air resistance and assume that the stones do not rebound after hitting the ground. Take g = 10 m s–2. Give the equations for the linear and curved parts of the plot.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

For the first stone:

Given,

Acceleration, a = –g = – 10 m/s2
Initial velocity, uI = 15 m/s

Now, we know
s1 = s0 + u1t + (1/2)at2
Given, the height of the tree, s0 = 200 m
s1 = 200 + 15t – 5t2      . . . . . . . . .  . ( 1 )
When this stone hits the jungle floor, s1 = 0
∴– 5t+ 15t + 200 = 0
t2 – 3t – 40 = 0
t2 – 8t + 5t – 40 = 0
t (t – 8) + 5 (t – 8) = 0
t = 8 s or t = – 5 s
Since the stone was thrown at time t = 0, the negative sign is not possible
∴t = 8 s
For the second stone:

Given,

Acceleration, a = – g = – 10 m/s2
Initial velocity, uII = 30 m/s

We know,
s2 = s0 + uIIt + (1/2)at2
= 200 + 30t – 5t2 . . . . . . . . .  . . .  . ( 2 )
when this stone hits the jungle floor; s2 = 0
– 5t2 + 30 t + 200 = 0
t2 – 6t – 40 = 0
t2 – 10t + 4t + 40 = 0
t (t – 10) + 4 (t – 10) = 0
(t – 10) (t + 4) = 0
t = 10 s or t = – 4 s
Here again, the negative sign is not possible
∴ t = 10 s
Subtracting equation (1) from equation (2), we get
s2 – s1 = (200 + 30t -5t2) – (200 + 15t -5t2)
s2 – s1 =15t                                           . . .  . . . . . . . . . .. . . . . . ( 3 )
Equation (3) represents the linear trajectory of the two stones because to this linear relation between (s– s1) and t,  the projection is a straight line till 8 s.
The maximum distance between the two stones is at t = 8 s.
(s2 – s1)max = 15× 8 = 120 m
This value has been depicted correctly in the above graph.
After 8 s, only the second stone is in motion, whose variation with time is given by the quadratic equation:
s2 – s= 200 + 30t – 5t2
Therefore, the equation of linear and curved path is given by:
s– s1 = 15t (Linear path)

s2 ­– s1 = 200 + 30t – 5t2 (Curved path)

Q27. The speed-time graph of a particle moving along a fixed direction is shown in the figure. Obtain the distance traversed by the particle between

(a) t = 0 s to 10 s,
(b) t = 2 s to 6 s.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

(a) Distance traversed by the particle between t = 0 s and t = 10 s

= area of the triangle = (1/2) x base x height

= (1/2) x 10 x x12 = 60 m

The average speed of the particle is 60 m/ 10 s = 6 m/s

(b) The distance travelled by the particle between t = 2 s and t = 6 s

= Let S1 be the distance travelled by the particle in time 2 to 5 s and S2 be the distance travelled by the particle in time 5 to 6 s.

For the motion from 0 sec to 5 sec

Now, u = 0 , t = 5 , v = 12 m/s

From the equation v = u + at, we get

a = (v – u)/t = 12/ 5 = 2.4 m/s2

Distance covered from 2 to 5 s, S1 = distance covered in 5 sec – distance covered in 2 sec

= (1/2) a (5)2 – (1/2) a (2)2 = (1/2) x 2.4 x (25 – 4) = 1.2 x 21 = 25.2 m

For the motion from 5 sec to 10 sec, u = 12 m/s and a = -2.4 m/s2

and t = 5 sec to t = 6 sec means n = 1 for this motion

Distance covered in the 6 the sec is S2 = u + (1/2) a (2n – 1)

= 12 – (2.4/2) (2 x 1 – 1) = 10.8 m

Therefore, the total distance covered from t = 2 s to 6 s = S1 + S2

= 25.2 + 10.8 = 36 m

Q28. The velocity-time graph of a particle in one-dimensional motion is shown in the figure.

(a) x (t2) = x (t1) + v (t1) (t2 – t1) + (1/2) a(t2 – t1)2

(b) v(t2) = v(t1) + a(t2 – t1)

(c) Vaverage =  [ x(t2) – x (t1)] /(t2 – t1)

(d)  aaverage =  [ v(t2) – v (t1)] /(t2 – t1)

(e) x (t2) = x (t1) + vav (t2 – t1) + (1/2) aav (t2 – t1)2

(f) x(t2) – x (t1) = Area under the v-t curve bounded by t- axis and the dotted lines.

NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line is an essential chapter that will help in your exam preparation. They consist of answers to the questions given in the textbook together with important questions from CBSE previous year question papers and CBSE sample papers. Exemplar problems provide solutions that help you in your exam preparation and cross-check your preparation level.

Ans.

The graph has a non-uniform slope between the intervals t1 and t2 (since the graph is not a straight line). The equations (a), (b) and (e) does not describe the motion of the particle. Only the relations (c), (d) and (f) are correct.

Subtopics of NCERT Class 11 Physics Chapter Motion in a Straight Line

  1. Introduction
  2. Position, path length and displacement
  3. Average velocity and average speed
  4. Instantaneous velocity and speed
  5. Acceleration
  6. Kinematic equations for uniformly accelerated motion
  7. Relative velocity

NCERT Solutions for Class 11 can be accessed anytime and can be downloaded easily. ANAND CLASSES (A School Of Competitions) presents the best study materials, notes, study material, books, previous year question papers, sample papers, videos and animation to help the students in their all-important Class 11 exams and entrance examinations.

Frequently Asked Questions on NCERT Solutions for Class 11 Physics Chapter Motion in a Straight Line

Q1

Why should I use the NCERT Solutions for Class 11 Physics Chapter 3 Motion in a Straight Line while preparing for the exams?

The NCERT Solutions for Class 11 Physics Chapter 3 Motion in a Straight Line provides students with simple and stepwise answers to the questions present in the textbook. The solutions are helpful in understanding the method of answering the questions in the exams. Students can save time and fasten their revision which is very effective for exam preparation. The expert teachers at ANAND CLASSES (A School Of Competitions) have designed the solutions based on the latest CBSE Syllabus and its guidelines.

Q2

What are the topics covered under Chapter 3 of NCERT Solutions for Class 11 Physics?

The topics covered under Chapter 3 of NCERT Solutions for Class 11 Physics are as follows:
1. Introduction
2. Position, Path Length and Displacement
3. Average Velocity and Average Speed
4. Instantaneous Velocity and Speed
5. Acceleration
6. Kinematic Equations for Uniformly Accelerated Motion
7. Relative Velocity.

Q3

What is the meaning of acceleration in Chapter 3 of NCERT Solutions for Class 11 Physics?

Acceleration is defined as the rate of change of velocity with respect to time. Acceleration is a vector quantity as it has both magnitude and direction. It is also the second derivative of position with respect to time, or it is the first derivative of velocity with respect to time.

Er. Neeraj K.Anand is a freelance mentor and writer who specializes in Engineering & Science subjects. Neeraj Anand received a B.Tech degree in Electronics and Communication Engineering from N.I.T Warangal & M.Tech Post Graduation from IETE, New Delhi. He has over 30 years of teaching experience and serves as the Head of Department of ANAND CLASSES. He concentrated all his energy and experiences in academics and subsequently grew up as one of the best mentors in the country for students aspiring for success in competitive examinations. In parallel, he started a Technical Publication "ANAND TECHNICAL PUBLISHERS" in 2002 and Educational Newspaper "NATIONAL EDUCATION NEWS" in 2014 at Jalandhar. Now he is a Director of leading publication "ANAND TECHNICAL PUBLISHERS", "ANAND CLASSES" and "NATIONAL EDUCATION NEWS". He has published more than hundred books in the field of Physics, Mathematics, Computers and Information Technology. Besides this he has written many books to help students prepare for IIT-JEE and AIPMT entrance exams. He is an executive member of the IEEE (Institute of Electrical & Electronics Engineers. USA) and honorary member of many Indian scientific societies such as Institution of Electronics & Telecommunication Engineers, Aeronautical Society of India, Bioinformatics Institute of India, Institution of Engineers. He has got award from American Biographical Institute Board of International Research in the year 2005.

CBSE Unit-wise Class 11 Physics Syllabus

Below we have provided the details of the CBSE Physics topics under each unit as per the revised CBSE Class 11 Physics Syllabus for the 2023-24 academic year. Go through it to get the details of the chapters given below.

Unit-I: Physical World and Measurement

Chapter 2: Units and Measurements

Need for measurement: Units of measurement; systems of units; SI units, fundamental and derived units. Length, mass and time measurements; accuracy and precision of measuring instruments; errors in measurement; significant figures.

Dimensions of physical quantities, dimensional analysis and its applications.

Unit-II: Kinematics

Chapter 3: Motion in a Straight Line

Frame of reference, Motion in a straight line, Elementary concepts of differentiation and integration for describing motion, uniform and nonuniform motion, and instantaneous velocity, uniformly accelerated motion, velocity-time and position-time graphs. Relations for uniformly accelerated motion (graphical treatment).

Chapter 4: Motion in a Plane

Scalar and vector quantities; position and displacement vectors, general vectors and their notations; equality of vectors, multiplication of vectors by a real number; addition and subtraction of vectors, relative velocity, Unit vector; resolution of a vector in a plane, rectangular components, Scalar and Vector product of vectors.

Motion in a plane, cases of uniform velocity and uniform acceleration-projectile motion, uniform circular motion.

Unit-III: Laws of Motion

Chapter 5: Laws of Motion

Intuitive concept of force, Inertia, Newton’s first law of motion; momentum and Newton’s second law of motion; impulse; Newton’s third law of motion (recapitulation only). Law of conservation of linear momentum and its applications. Equilibrium of concurrent forces, Static and kinetic friction, laws of friction, rolling friction, lubrication.

Dynamics of uniform circular motion: Centripetal force, examples of circular motion (vehicle on a level circular road, vehicle on a banked road).

Unit-IV: Work, Energy and Power

Chapter 6: Work, Energy and Power

Work done by a constant force and a variable force; kinetic energy, work-energy theorem, power.

Notion of potential energy, potential energy of a spring, conservative forces: conservation of mechanical energy (kinetic and potential energies); non-conservative forces: motion in a vertical circle; elastic and inelastic collisions in one and two dimensions.

Unit-V: Motion of System of Particles and Rigid Body

Chapter 7: System of Particles and Rotational Motion

Centre of mass of a two-particle system, momentum conservation and centre of mass motion. Centre of mass of a rigid body; centre of mass of a uniform rod. Moment of a force, torque, angular momentum, law of conservation of angular momentum and its applications.

Equilibrium of rigid bodies, rigid body rotation and equations of rotational motion, comparison of linear and rotational motions.

Moment of inertia, radius of gyration, values of moments of inertia for simple geometrical objects (no derivation).

Unit-VI: Gravitation

Chapter 8: Gravitation

Kepler’s laws of planetary motion, universal law of gravitation. Acceleration due to gravity and its variation with altitude and depth. Gravitational potential energy and gravitational potential, escape speed, orbital velocity of a satellite.

Unit-VII: Properties of Bulk Matter

Chapter 9: Mechanical Properties of Solids

Elasticity, Stress-strain relationship, Hooke’s law, Young’s modulus, bulk modulus, shear modulus of rigidity (qualitative idea only), Poisson’s ratio; elastic energy.

Chapter 10: Mechanical Properties of Fluids

Pressure due to a fluid column; Pascal’s law and its applications (hydraulic lift and hydraulic brakes), effect of gravity on fluid pressure.

Viscosity, Stokes’ law, terminal velocity, streamline and turbulent flow, critical velocity, Bernoulli’s theorem and its applications.

Surface energy and surface tension, angle of contact, excess of pressure across a curved surface, application of surface tension ideas to drops, bubbles and capillary rise.

Chapter 11: Thermal Properties of Matter

Heat, temperature,( recapitulation only) thermal expansion; thermal expansion of solids, liquids and gases, anomalous expansion of water; specific heat capacity; Cp, Cv – calorimetry; change of state – latent heat capacity.

Heat transfer-conduction, convection and radiation (recapitulation only), thermal conductivity, qualitative ideas of Blackbody radiation, Wein’s displacement Law, Stefan’s law.

Unit-VIII: Thermodynamics

Chapter 12: Thermodynamics

Thermal equilibrium and definition of temperature (zeroth law of thermodynamics), heat, work and internal energy. First law of thermodynamics, Second law of thermodynamics: gaseous state of matter, change of condition of gaseous state -isothermal, adiabatic, reversible, irreversible, and cyclic processes.

Unit-IX: Behaviour of Perfect Gases and Kinetic Theory of Gases

Chapter 13: Kinetic Theory

Equation of state of a perfect gas, work done in compressing a gas.

Kinetic theory of gases – assumptions, concept of pressure. Kinetic interpretation of temperature; rms speed of gas molecules; degrees of freedom, law of equi-partition of energy (statement only) and application to specific heat capacities of gases; concept of mean free path, Avogadro’s number.

Unit-X: Oscillations and Waves

Chapter 14: Oscillations

Periodic motion – time period, frequency, displacement as a function of time, periodic functions and their application.

Simple harmonic motion (S.H.M) and its equations of motion; phase; oscillations of a loaded spring- restoring force and force constant; energy in S.H.M. Kinetic and potential energies; simple pendulum derivation of expression for its time period.

Chapter 15: Waves

Wave motion: Transverse and longitudinal waves, speed of travelling wave, displacement relation for a progressive wave, principle of superposition of waves, reflection of waves, standing waves in strings and organ pipes, fundamental mode and harmonics, Beats.

Students can also access the syllabus for other subjects by visiting Syllabus page of CBSE Class 11.

CBSE Syllabus for Class 11 Physics Practical

Below are the list of the experiments of Physics practicals.

Evaluation Scheme for Class 11 Physics Practical 2023-24

Topic Marks
Two experiments, one from each section7 + 7
Practical record (experiment and activities)5
One activity from any section3
Investigatory Project3
Viva on experiments, activities and project5
Total 30

CBSE Class 11 Physics Practical Syllabus

Section – A

CBSE 11 Physics Syllabus Experiments 

1. To measure the diameter of a small spherical/cylindrical body and to measure internal diameter and depth of a given beaker/calorimeter using Vernier Callipers and hence find its volume.
2. To measure the diameter of a given wire and thickness of a given sheet using screw gauge.
3. To determine the volume of an irregular lamina using the screw gauge.
4. To determine the radius of curvature of a given spherical surface by a spherometer.
5. To determine the mass of two different objects using a beam balance.
6. To find the weight of a given body using parallelogram law of vectors.
7. Using a simple pendulum, plot its L-T2 graph and use it to find the effective length of second’s pendulum.
8. To study variation of time period of a simple pendulum of a given length by taking bobs of same size but different masses and interpret the result.
9. To study the relationship between force of limiting friction and normal reaction and to find the co- efficient of friction between a block and a horizontal surface.
10. To find the downward force, along an inclined plane, acting on a roller due to gravitational pull of the earth and study its relationship with the angle of inclination θ by plotting graph between force and sin θ.

CBSE 11 Physics Syllabus Activities

1. To make a paper scale of given least count, e.g., 0.2cm, 0.5 cm.
2. To determine mass of a given body using a metre scale by principle of moments.
3. To plot a graph for a given set of data, with proper choice of scales and error bars.
4. To measure the force of limiting friction for rolling of a roller on a horizontal plane.
5. To study the variation in range of a projectile with angle of projection.
6. To study the conservation of energy of a ball rolling down on an inclined plane (using a double inclined plane).
7. To study dissipation of energy of a simple pendulum by plotting a graph between square of amplitude and time.

Section – B

CBSE 11 Physics Syllabus Experiments 

1. To determine Young’s modulus of elasticity of the material of a given wire.
2. To find the force constant of a helical spring by plotting a graph between load and extension.
3. To study the variation in volume with pressure for a sample of air at constant temperature by plotting graphs between P and V, and between P and 1/V.
4. To determine the surface tension of water by capillary rise method.
5. To determine the coefficient of viscosity of a given viscous liquid by measuring terminal velocity of a given spherical body.
6. To study the relationship between the temperature of a hot body and time by plotting a cooling curve.
7. To determine specific heat capacity of a given solid by method of mixtures.
8. To study the relation between frequency and length of a given wire under constant tension using sonometer.
9. To study the relation between the length of a given wire and tension for constant frequency using sonometer.
10. To find the speed of sound in air at room temperature using a resonance tube by two resonance positions.

CBSE 11 Physics Syllabus Activities

1. To observe change of state and plot a cooling curve for molten wax.
2. To observe and explain the effect of heating on a bi-metallic strip.
3. To note the change in level of liquid in a container on heating and interpret the observations.
4. To study the effect of detergent on surface tension of water by observing capillary rise.
5. To study the factors affecting the rate of loss of heat of a liquid.
6. To study the effect of load on depression of a suitably clamped metre scale loaded at (i) its end (ii) in the middle.
7. To observe the decrease in pressure with increase in velocity of a fluid.

Practical Examination for Visually Impaired Students of Class 11 Evaluation Scheme

Time: 2 Hours
Max. Marks: 30

Topic Marks
Identification/Familiarity with the apparatus5
Written test (based on given/prescribed practicals)10
Practical Record5
Viva10
Total30

A. Items for Identification/Familiarity of the apparatus for assessment in practicals (All experiments). 

Spherical ball, Cylindrical objects, vernier calipers, beaker, calorimeter, Screw gauge, wire, Beam balance, spring balance, weight box, gram and milligram weights, forcep, Parallelogram law of vectors apparatus, pulleys and pans used in the same ‘weights’ used, Bob and string used in a simple pendulum, meter scale, split cork, suspension arrangement, stop clock/stop watch, Helical spring, suspension arrangement used, weights, arrangement used for measuring extension, Sonometer, Wedges, pan and pulley used in it, ‘weights’ Tuning Fork, Meter scale, Beam balance, Weight box, gram and
milligram weights, forceps, Resonance Tube, Tuning Fork, Meter scale, Flask/Beaker used for adding water.

B. List of Practicals

1. To measure diameter of a small spherical/cylindrical body using vernier calipers.
2. To measure the internal diameter and depth of a given beaker/calorimeter using vernier calipers and hence find its volume.
3. To measure diameter of given wire using screw gauge.
4. To measure thickness of a given sheet using screw gauge.
5. To determine the mass of a given object using a beam balance.
6. To find the weight of given body using the parallelogram law of vectors.
7. Using a simple pendulum plot L-T and L-T2 graphs. Hence find the effective length of second’s pendulum using appropriate length values.
8. To find the force constant of given helical spring by plotting a graph between load and extension.
9. (i) To study the relation between frequency and length of a given wire under constant tension using a sonometer.
(ii) To study the relation between the length of a given wire and tension, for
constant frequency, using a sonometer.
10. To find the speed of sound in air, at room temperature, using a resonance tube, by observing the two resonance positions.

Note: The above practicals of CBSE 11 Physics Syllabus may be carried out in an experiential manner rather than recording observations.

Did you find CBSE 11 Physics Syllabus useful for your studies? Do let us know your view in the comment section. Get access to interactive lessons and videos related to CBSE Maths and Science with ANAND CLASSES (A School Of Competitions) – The Learning App. 

Frequently Asked Questions on CBSE Class 11 Physics Syllabus

Q1

According to the CBSE Class 11 Physics Syllabus, which are the units of high marks weightage?

According to the CBSE Class 11 Physics Syllabus, physical world and measurement, kinematics and laws of motion are the units of high-mark weightage.

Q2

How is the practical syllabus of the CBSE Class 11 Physics divided into sections A and B?

The practical syllabus of the CBSE Class 11 Physics contains 10 experiments in section A and 10 experiments in section B with 7 physical activities mentioned for each.

Q3

Which are the basic concepts present in the CBSE Syllabus for Class 11 Physics?

The basic concepts present in the CBSE Syllabus for Class 11 Physics are Thermodynamics, Laws of Motion, Oscillations and Waves.