The elements in Group 18 of the periodic table are known as the noble gases. These elements are also known as the inert gases, which is a very appropriate name for them since this group of elements exhibits extremely inert chemical behaviour.
Table of Contents
Members of the Inert Gas Family
The members of group 18 in the modern periodic table are:
These gases are so-called due to the stability of these elements. This stability is due to the completely filled outermost shells of the elements. The inert gases are used in various applications irrespective of their inert or scarcely reactive nature.
The inert gases are typical non-metals in many ways. They are colourless, odourless gases which have low melting and boiling points. They are poor conductors of heat and electricity even when in the liquid form. Just like in other groups of the periodic table, there are clear trends in the melting and boiling points of the inert gases. The melting and boiling points increase down the group – although as the boiling points increase down the group – although as the boiling point of radon is still only -62oC they all boil at pretty low temperatures.
The density of the inert gases also increases going down the group, the result of the atoms getting bigger all the time. Helium has the smallest and lightest atoms and so helium gas is less dense than air, a fact which is important when we look at it.
Uses of Noble Gases
In metallurgical processes, argon is widely used in order to provide the necessary inert atmosphere. This inert atmosphere plays an important role in welding titanium, aluminium, stainless steel, and magnesium. It is also used in the production of titanium.
A limited amount of argon is used in germanium and silicon crystals which are used in electric light bulbs, transistors, etc.
The boiling point of helium is the least when compared to any other liquid. It is used to obtain the lowest temperatures required in lasers.
Helium is used in nuclear reactors as a cooling gas and used as a flow-gas in liquid-gas chromatography. It finds its application in airships and helium balloons.
Helium balloons are used to check the weather of a particular region. Helium is preferred over hydrogen though hydrogen is cheaper, as helium is readily available and hydrogen is highly inflammable. Hence, due to safety issues helium is preferred in aircraft.
It is used by divers to dilute oxygen over nitrogen in the gas cylinders used by them as nitrogen can easily be dissolved in the blood which results in a painful condition called bends. The risk of helium causing bends is slightly lower than nitrogen.
Neon is used in discharge tubes which is the reason behind the reddish-orange glow produced by neon lights.
Xenon and krypton find their application in photographic flash units due to the generation of very bright light. It is also used in lighthouses.
Neon, xenon, and krypton are used to produce different colour lights.
How were the Inert Gases Discovered?
The inert gases are invisible and unreactive and this makes them very difficult to spot when they are mixed with other gases in air. In 1894, there was no reason to suspect they existed at all.
In that year Sir William Ramsay did an interesting experiment. He wanted to see what happened when all the gases were removed from the air. He did this by passing air over heated copper and heated magnesium. He expects to have nothing left at the end. He reasoned that everything in the air would react, either with the hot copper or with the hot magnesium. In fact, he found that from every 100cm3 of air about 1cm3 always remained behind.
William Ramsay was such a good scientist that he knew he hadn’t made an error. No matter how often he repeated the experiment, he always had the same proportion of gas left behind. He did lots of experiments on the leftover gas to try and make it react with something. He tried the most reactive substance he knew, including fluorine, phosphorus and potassium, but it never did anything. So he called this rather boring new gas argon, from a Greek word meaning lazy or inactive.
Frequently Asked Questions – FAQs
Q1
Why are inert gases important?
The noble gases often do not react with many substances and have been historically called inert gases. Generally, inert gases are used to prevent unwanted chemical reactions which degrade a sample. Oxidation and hydrolysis reactions with the oxygen and moisture in air are often these undesirable chemical reactions.
Q2
Why inert gases do not react?
These atoms’ full-valence electron shells make noble gases highly stable and difficult to form chemical bonds, since they continue to gain or lose electrons. Although noble gasses usually do not react to form compounds with other elements, there are some exceptions.
Q3
What are the properties of the noble gases?
Other characteristics of the noble gasses are that they all conduct electricity, fluorescent, are odourless and colourless, and are used under several conditions where a stable element is needed to maintain a healthy and constant environment. This series of chemicals contains helium, neon, argon, krypton, xenon and radon.
Q4
Why are noble gases called noble?
The noble gases are helium, argon, krypton, xenon, and radon, in order of their mass. They are called noble gases because they are so majestic that they do not react with anything in general. They’re also known as inert gases for this reason.
Neeraj Anand, Param Anand
Er. Neeraj K.Anand is a freelance mentor and writer who specializes in Engineering & Science subjects. Neeraj Anand received a B.Tech degree in Electronics and Communication Engineering from N.I.T Warangal & M.Tech Post Graduation from IETE, New Delhi. He has over 30 years of teaching experience and serves as the Head of Department of ANAND CLASSES. He concentrated all his energy and experiences in academics and subsequently grew up as one of the best mentors in the country for students aspiring for success in competitive examinations.
In parallel, he started a Technical Publication "ANAND TECHNICAL PUBLISHERS" in 2002 and Educational Newspaper "NATIONAL EDUCATION NEWS" in 2014 at Jalandhar. Now he is a Director of leading publication "ANAND TECHNICAL PUBLISHERS", "ANAND CLASSES" and "NATIONAL EDUCATION NEWS".
He has published more than hundred books in the field of Physics, Mathematics, Computers and Information Technology. Besides this he has written many books to help students prepare for IIT-JEE and AIPMT entrance exams. He is an executive member of the IEEE (Institute of Electrical & Electronics Engineers. USA) and honorary member of many Indian scientific societies such as Institution of Electronics & Telecommunication Engineers, Aeronautical Society of India, Bioinformatics Institute of India, Institution of Engineers. He has got award from American Biographical Institute Board of International Research in the year 2005.
CBSE Class 11 Chemistry Syllabus is a vast which needs a clear understanding of the concepts and topics. Knowing CBSE Class 11 Chemistry syllabus helps students to understand the course structure of Chemistry.
Unit-wise CBSE Class 11 Syllabus for Chemistry
Below is a list of detailed information on each unit for Class 11 Students.
UNIT I – Some Basic Concepts of Chemistry
General Introduction: Importance and scope of Chemistry.
Nature of matter, laws of chemical combination, Dalton’s atomic theory: concept of elements, atoms and molecules.
Atomic and molecular masses, mole concept and molar mass, percentage composition, empirical and molecular formula, chemical reactions, stoichiometry and calculations based on stoichiometry.
UNIT II – Structure of Atom
Discovery of Electron, Proton and Neutron, atomic number, isotopes and isobars. Thomson’s model and its limitations. Rutherford’s model and its limitations, Bohr’s model and its limitations, concept of shells and subshells, dual nature of matter and light, de Broglie’s relationship, Heisenberg uncertainty principle, concept of orbitals, quantum numbers, shapes of s, p and d orbitals, rules for filling electrons in orbitals – Aufbau principle, Pauli’s exclusion principle and Hund’s rule, electronic configuration of atoms, stability of half-filled and completely filled orbitals.
UNIT III – Classification of Elements and Periodicity in Properties
Significance of classification, brief history of the development of periodic table, modern periodic law and the present form of periodic table, periodic trends in properties of elements -atomic radii, ionic radii, inert gas radii, Ionization enthalpy, electron gain enthalpy, electronegativity, valency. Nomenclature of elements with atomic number greater than 100.
UNIT IV – Chemical Bonding and Molecular Structure
Valence electrons, ionic bond, covalent bond, bond parameters, Lewis structure, polar character of covalent bond, covalent character of ionic bond, valence bond theory, resonance, geometry of covalent molecules, VSEPR theory, concept of hybridization, involving s, p and d orbitals and shapes of some simple molecules, molecular orbital theory of homonuclear diatomic molecules(qualitative idea only), Hydrogen bond.
UNIT V – Chemical Thermodynamics
Concepts of System and types of systems, surroundings, work, heat, energy, extensive and intensive properties, state functions. First law of thermodynamics – internal energy and enthalpy, measurement of U and H, Hess’s law of constant heat summation, enthalpy of bond dissociation, combustion, formation, atomization, sublimation, phase transition, ionization, solution and dilution. Second law of Thermodynamics (brief introduction) Introduction of entropy as a state function, Gibb’s energy change for spontaneous and nonspontaneous processes. Third law of thermodynamics (brief introduction).
UNIT VI – Equilibrium
Equilibrium in physical and chemical processes, dynamic nature of equilibrium, law of mass action, equilibrium constant, factors affecting equilibrium – Le Chatelier’s principle, ionic equilibrium- ionization of acids and bases, strong and weak electrolytes, degree of ionization, ionization of poly basic acids, acid strength, concept of pH, hydrolysis of salts (elementary idea), buffer solution, Henderson Equation, solubility product, common ion effect (with illustrative examples).
UNIT VII – Redox Reactions
Concept of oxidation and reduction, redox reactions, oxidation number, balancing redox reactions, in terms of loss and gain of electrons and change in oxidation number, applications of redox reactions.
UNIT VIII – Organic Chemistry: Some basic Principles and Techniques
General introduction, classification and IUPAC nomenclature of organic compounds. Electronic displacements in a covalent bond: inductive effect, electromeric effect, resonance and hyper conjugation. Homolytic and heterolytic fission of a covalent bond: free radicals, carbocations, carbanions, electrophiles and nucleophiles, types of organic reactions.
UNIT IX – Hydrocarbons
Classification of Hydrocarbons Aliphatic Hydrocarbons: Alkanes – Nomenclature, isomerism, conformation (ethane only), physical properties, chemical reactions. Alkenes – Nomenclature, structure of double bond (ethene), geometrical isomerism, physical properties, methods of preparation, chemical reactions: addition of hydrogen, halogen, water, hydrogen halides (Markovnikov’s addition and peroxide effect), ozonolysis, oxidation, mechanism of electrophilic addition. Alkynes – Nomenclature, structure of triple bond (ethyne), physical properties, methods of preparation, chemical reactions: acidic character of alkynes, addition reaction of – hydrogen, halogens, hydrogen halides and water.
Aromatic Hydrocarbons:
Introduction, IUPAC nomenclature, benzene: resonance, aromaticity, chemical properties: mechanism of electrophilic substitution. Nitration, sulphonation, halogenation, Friedel Craft’s alkylation and acylation, directive influence of functional group in monosubstituted benzene. Carcinogenicity and toxicity.
To know the CBSE Syllabus for all the classes from 1 to 12, visit the Syllabus page of CBSE. Meanwhile, to get the Practical Syllabus of Class 11 Chemistry, read on to find out more about the syllabus and related information in this page.
CBSE Class 11 Chemistry Practical Syllabus with Marking Scheme
In Chemistry subject, practical also plays a vital role in improving their academic scores in the subject. The overall weightage of Chemistry practical mentioned in the CBSE Class 11 Chemistry syllabus is 30 marks. So, students must try their best to score well in practicals along with theory. It will help in increasing their overall academic score.
CBSE Class 11 Chemistry Practical Syllabus
The experiments will be conducted under the supervision of subject teacher. CBSE Chemistry Practicals is for 30 marks. This contribute to the overall practical marks for the subject.
The table below consists of evaluation scheme of practical exams.
Evaluation Scheme
Marks
Volumetric Analysis
08
Salt Analysis
08
Content Based Experiment
06
Project Work
04
Class record and viva
04
Total
30
CBSE Syllabus for Class 11 Chemistry Practical
Micro-chemical methods are available for several of the practical experiments. Wherever possible such techniques should be used.
A. Basic Laboratory Techniques 1. Cutting glass tube and glass rod 2. Bending a glass tube 3. Drawing out a glass jet 4. Boring a cork
B. Characterization and Purification of Chemical Substances 1. Determination of melting point of an organic compound. 2. Determination of boiling point of an organic compound. 3. Crystallization of impure sample of any one of the following: Alum, Copper Sulphate, Benzoic Acid.
C. Experiments based on pH
1. Any one of the following experiments:
Determination of pH of some solutions obtained from fruit juices, solution of known and varied concentrations of acids, bases and salts using pH paper or universal indicator.
Comparing the pH of solutions of strong and weak acids of same concentration.
Study the pH change in the titration of a strong base using universal indicator.
2. Study the pH change by common-ion in case of weak acids and weak bases.
D. Chemical Equilibrium One of the following experiments:
1. Study the shift in equilibrium between ferric ions and thiocyanate ions by increasing/decreasing the concentration of either of the ions. 2. Study the shift in equilibrium between [Co(H2O)6] 2+ and chloride ions by changing the concentration of either of the ions.
E. Quantitative Estimation i. Using a mechanical balance/electronic balance. ii. Preparation of standard solution of Oxalic acid. iii. Determination of strength of a given solution of Sodium hydroxide by titrating it against standard solution of Oxalic acid. iv. Preparation of standard solution of Sodium carbonate. v. Determination of strength of a given solution of hydrochloric acid by titrating it against standard Sodium Carbonatesolution.
F. Qualitative Analysis 1) Determination of one anion and one cation in a given salt Cations‐ Pb2+, Cu2+, As3+, Al3+, Fe3+, Mn2+, Ni2+, Zn2+, Co2+, Ca2+, Sr2+, Ba2+, Mg2+, NH4+ Anions – (CO3)2‐ , S2‐, NO2‐ , SO32‐, SO2‐ , NO ‐ , Cl‐ , Br‐, I‐, PO43‐ , C2O2‐ ,CH3COO‐ (Note: Insoluble salts excluded)
2) Detection of ‐ Nitrogen, Sulphur, Chlorine in organic compounds.
G) PROJECTS Scientific investigations involving laboratory testing and collecting information from other sources.
A few suggested projects are as follows:
Checking the bacterial contamination in drinking water by testing sulphide ion
Study of the methods of purification of water.
Testing the hardness, presence of Iron, Fluoride, Chloride, etc., depending upon the regional variation in drinking water and study of causes of presence of these ions above permissible limit (if any).
Investigation of the foaming capacity of different washing soaps and the effect of addition of Sodium carbonate on it.
Study the acidity of different samples of tea leaves.
Determination of the rate of evaporation of different liquids Study the effect of acids and bases on the tensile strength of fibres.
Study of acidity of fruit and vegetable juices.
Note: Any other investigatory project, which involves about 10 periods of work, can be chosen with theapproval of the teacher.
Practical Examination for Visually Impaired Students of Class 11
Below is a list of practicals for the visually impaired students.
A. List of apparatus for identification for assessment in practicals (All experiments) Beaker, tripod stand, wire gauze, glass rod, funnel, filter paper, Bunsen burner, test tube, test tube stand, dropper, test tube holder, ignition tube, china dish, tongs, standard flask, pipette, burette, conical flask, clamp stand, dropper, wash bottle • Odour detection in qualitative analysis • Procedure/Setup of the apparatus
B. List of Experiments A. Characterization and Purification of Chemical Substances 1. Crystallization of an impure sample of any one of the following: copper sulphate, benzoic acid B. Experiments based on pH 1. Determination of pH of some solutions obtained from fruit juices, solutions of known and varied concentrations of acids, bases and salts using pH paper 2. Comparing the pH of solutions of strong and weak acids of same concentration.
C. Chemical Equilibrium 1. Study the shift in equilibrium between ferric ions and thiocyanate ions by increasing/decreasing the concentration of eitherions. 2. Study the shift in equilibrium between [Co(H2O)6]2+ and chloride ions by changing the concentration of either of the ions.
D. Quantitative estimation 1. Preparation of standard solution of oxalic acid. 2. Determination of molarity of a given solution of sodium hydroxide by titrating it against standard solution of oxalic acid.
E. Qualitative Analysis 1. Determination of one anion and one cation in a given salt 2. Cations – NH+4 Anions – (CO3)2-, S2-, (SO3)2-, Cl-, CH3COO- (Note: insoluble salts excluded) 3. Detection of Nitrogen in the given organic compound. 4. Detection of Halogen in the given organic compound.
Note: The above practicals may be carried out in an experiential manner rather than recording observations.
We hope students must have found this information on CBSE Syllabus useful for their studying Chemistry. Learn Maths & Science in interactive and fun loving ways with ANAND CLASSES (A School Of Competitions) App/Tablet.
Frequently Asked Questions on CBSE Class 11 Chemistry Syllabus
Q1
How many units are in the CBSE Class 11 Chemistry Syllabus?
There are 9 units in the CBSE Class 11 Chemistry Syllabus. Students can access various study materials for the chapters mentioned in this article for free at ANAND CLASSES (A School Of Competitions).
Q2
What is the total marks for practicals examination as per the CBSE Class 11 Chemistry Syllabus?
The total marks for the practicals as per the CBSE Class 11 Chemistry Syllabus is 30. It includes volumetric analysis, content-based experiment, salt analysis, class record, project work and viva.
Q3
Which chapter carries more weightage as per the CBSE Syllabus for Class 11 Chemistry?
The organic chemistry chapter carries more weightage as per the CBSE Syllabus for Class 11 Chemistry.
Anand Technical Publishers
Buy Products (Printed Books & eBooks) of Anand Classes published by Anand Technical Publishers, Visit at following link :
