Errors in Measurement – Absolute Error, Relative Error and Tolerance

Any measurement that you make is just an approximation, 100% accuracy is not possible. If you measure the same object two different times, the two measurements may not be precisely the same. The difference between the two measurements is called a Variation in the measurement s.

  • This variation introduces an unwanted but unavoidable uncertainty in our measurement. 
  • This uncertainty is called the Errors in measurement
  • This ‘error’ should not be confused with a ‘mistake’. 
  • Error, unlike mistake, does not mean you got the wrong answer. 
  • It just means you didn’t get as close to the true value as possible. 
  • The errors in measurement are a mathematical way to show the uncertainty in the measurement.
  • It is the difference between the result of the “ measurement and the true value” of what you were measuring.

How to Find Errors in Measurement?

Tolerance/ Margin of Error

  • Error in measurement may be represented by a tolerance (margin of error).
  • Machines used in manufacturing often set tolerance intervals or ranges in which product measurements will be tolerated or accepted before they are considered flawed.
  • Tolerance refers to the greatest range of variation that can be allowed or is acceptable
  • It is one-half of the precision of an instrument.
    • So, to obtain the range, we add and subtract one-half of the precision of the measuring instruments.
    • A ruler has to measure an object which has a length of 5.4 cm, and it measures this with a precision of 0.1 cm. 
    • This gives a tolerance interval in this measurement is 5.4 ± 0.05 cm, or from 5.35 cm to 5.45 cm.
    • Any measurements within this range are “tolerated” or perceived as correct.

Absolute Error

  • Absolute error in measurement refers to the actual amount of error in the measurement. 
  • The absolute error of the measurement shows how large the error actually is. 
  • Absolute error is inadequate because it does not give any details regarding the importance or graveness of the error. 
  • If you are measure distances between cities kilometers apart, an error of a few centimeters is negligible and is irrelevant. 
  • On the other hand, an error of centimeters when measuring small machine parts is a very significant error. 
  • Both the errors are in the order of centimeters, but the second error is more severe than the first.
  • Absolute Error can be represented by the expression:
    Eabsolute = |xmeasured – xactual|
  • Example:
    • If you know a length is 3.535 m + 0.004 m, then 0.004 m is an absolute error. 
    • The absolute error is the “difference between the measured value and the actual value”.

Relative Error

    • Relative error represents the ratio of the absolute error of the measurement to the accepted measurement. 
    • If the true measurement of the object is not known then the relative error is found using the measured value. The expression for relative error is:
      Erelative = Eabsolute/xactual
    • Relative Error = |xmeasured – xaccepted|/xactual

Percentage Error

Percent error formula is the absolute value of the difference of the measured value and the actual value divided by the actual value and multiplied by 100.

Formula for Percent Error

The formula to calculate Percent Error is:

Percentage Error = [(Approximate Value – Exact Value) / Exact Value] × 100

Solved Example

Example 1: A scale measures wrongly a value as 8 cm due to some marginal errors. Calculate the percentage error if the actual measurement of the value is 12 cm.

Solution:

Given,
Approximate value = 8 cm
Exact value = 12 cm

Percentage Error = (Approximate Value – Exact Value / Exact Value × 100)

Percentage Error = (8 – 12)/12 × 100 = -33.3%

Er. Neeraj K.Anand is a freelance mentor and writer who specializes in Engineering & Science subjects. Neeraj Anand received a B.Tech degree in Electronics and Communication Engineering from N.I.T Warangal & M.Tech Post Graduation from IETE, New Delhi. He has over 30 years of teaching experience and serves as the Head of Department of ANAND CLASSES. He concentrated all his energy and experiences in academics and subsequently grew up as one of the best mentors in the country for students aspiring for success in competitive examinations. In parallel, he started a Technical Publication "ANAND TECHNICAL PUBLISHERS" in 2002 and Educational Newspaper "NATIONAL EDUCATION NEWS" in 2014 at Jalandhar. Now he is a Director of leading publication "ANAND TECHNICAL PUBLISHERS", "ANAND CLASSES" and "NATIONAL EDUCATION NEWS". He has published more than hundred books in the field of Physics, Mathematics, Computers and Information Technology. Besides this he has written many books to help students prepare for IIT-JEE and AIPMT entrance exams. He is an executive member of the IEEE (Institute of Electrical & Electronics Engineers. USA) and honorary member of many Indian scientific societies such as Institution of Electronics & Telecommunication Engineers, Aeronautical Society of India, Bioinformatics Institute of India, Institution of Engineers. He has got award from American Biographical Institute Board of International Research in the year 2005.